When your ultimate goal is providing customers with clean, clear drinking water, there’s no room for second guessing your equipment. It’s got to be robust, reliable and secure; and in the current economic times, cost-effective too.
Accutech wireless instrumentation is all this and more with a field-proven selection of self-contained and self-powered field units that utilise secure, frequency-hopping, spread-spectrum communications over local and long-haul distances; all at a fraction of the cost of traditional hard-wired installations.
Analog and Digital I/O
Ideal for adding wireless capabilities in remote or hazardous locations to existing or newly wired devices such as Residual Chlorine sensors, Dissolved Oxygen probes, Nephelometric Turbidity Units (NTU), ultrasonic and radar level meters: the Accutech AI10 and AV10 wireless multi-input field units provide two analog inputs in either current (4-20mA) or voltage (0-10V) configurations. Each unit also includes two discrete contact closures.
Analog outputs and switch closure outputs are also available in a DIN-rail mounted module at the Accutech base radio.
 |
AI10 Wireless Multi-Input SI10 Wireless Switch Input 4AO/8SW Analog & Switch Output Module |
Level
These wireless tank level field units use a submersible pressure sensor to provide hydrostatic level of a vented tank or well. Specific-gravity correction and all common level units are offered.
 |
SL10 Wireless Submersible Level GL10 Wireless Gauge Level |
Flow
Open channel flow may be measured from liquid level using the DP20 wireless differential pressure sensor. When the DP20 operates in Open Channel Mode it may be configured with a K factor to report directly in units of flow. Channels with irregular dimensions can be accommodated using an additional 22-point custom curve.
 |
DP20 Wireless Differential Pressure |
Highly accurate turbine meter totaliser measures liquid and gas volumetric flowrate and totalises accumulated flow volume from standard turbine flow meters (customer supplied turbine meter). Frequency range 1Hz to 10kHz.
 |
TM10 Wireless Turbine Meter Totaliser |
Pressure
Accutech wireless pressure sensors measure gauge, absolute or differential pressure in most corrosive or non-corrosive liquids and gases. Sensor diaphragm is 316 stainless steel (or Hastelloy C upon special request).
| Pressure ranges available: | 5 to 10000 psig |
| +/- 100 inches H2O to 300 psi differential | |
| 30 to 250 psia |
|
GP10 Wireless Gauge Pressure DP20 Wireless Differential Pressure AP10 Wireless Absolute Pressure |
Temperature
The TC10 wireless thermocouple provides temperature data using standard J, K, S and T-type thermocouples. Wireless RTD temperature field units offer standard and non-standard RTDs including 4-wire DIN 100 Ω platinum, SAMA 100 Ω platinum and DIN 1000 Ω platinum.
 |
TC10 Wireless Thermocouple RT10 Wireless RTD |
