Harness the power of innovative wireless technology for your oil and gas control instrumentation needs.
With its versatile selection of field units and base radios, Accutech provides key cost-saving components to help you get the highest rate of return from your control automation and data information systems, including:
Pressure
Accutech wireless pressure sensors measure gauge, absolute or differential pressure in most corrosive or non-corrosive liquids and gases. Sensor diaphragm is 316 stainless steel (or Hastelloy C upon special request).
| Pressure ranges available: | 5 to 10000 psig |
| +/- 100 inches H2O to 300 psi differential | |
| 30 to 250 psia |
 |
GP10 Wireless Gauge Pressure DP20 Wireless Differential Pressure AP10 Wireless Absolute Pressure |
Temperature
The TC10 wireless thermocouple provides temperature data using standard J, K, S and T-type thermocouples. Wireless RTD temperature field units offer standard and non-standard RTDs including 4-wire DIN 100 Ω platinum, SAMA 100 Ω platinum and DIN 1000 Ω platinum.
 |
TC10 Wireless Thermocouple RT10 Wireless RTD |
Flow
The Differential Pressure Field Unit may be operated in any one of four modes: Differential Pressure, Orifice Flow, Open Channel Flow and Level, and may be configured with a 22-point custom curve capability. The product also has a square root function for use with orifice plates, v-cones, and pitot tubes, providing volumetric flow measurement.
|
DP20 Wireless Differential Pressure |
Highly accurate turbine meter totalizer measures liquid and gas volumetric flowrate and totalizes accumulated flow volume from standard turbine flow meters (customer supplied turbine meter). Frequency range 1Hz to 10kHz.
 |
TM10 Wireless Turbine Meter Totalizer |
Equipment Monitoring
The AM20 Acoustic Monitor measures ultrasound and ambient temperature levels to provide monitoring for pressure relief valves, steam traps, automatic tank cleaning (CIP) systems, on/off conditions of compressors and pumps, and any other application that generates ultrasound.
 |
AM20 Wireless Acoustic Monitor |
Level
The SL10 and GL10 wireless tank level field units use a submersible pressure sensor to provide hydrostatic level of a vented tank or well. Specific-gravity correction and all common level units are offered.
The DP20 is ideally suited for level applications in pressurized tanks, such as propane & butane tanks.
 |
SL10 Wireless Submersible Level GL10 Wireless Gauge Level DP20 Wireless Differential Pressure |
Analog and Digital I/O
Ideal for adding wireless capabilities in remote or hazardous locations to existing or newly wired devices such as proximity switches, level switches, valve position, ultrasonic and radar level meters, or any other analog or switch input: the Accutech AI10 and AV10 wireless multi-input field units provide two analog inputs in either current (4-20mA) or voltage (0-10V) configurations. Each unit also includes two discrete contact closures.
Analog outputs and switch closure outputs are also available in a DIN-rail mounted module at the Accutech base radio.
 |
AI10 Wireless Multi-Input SI10 Wireless Switch Input 4AO/8SW Analog & Switch Output Modules |
