No matter the industry, no matter the application, Accutech makes a valuable contribution with a solid selection of multi-use field units engineered to work in a variety of tough industrial environments.
Wherever field sensor access is physically restricted or a traditional hard-wired connection is not economically viable, Accutech’s wireless technology brings remote IO functionality to your automation toolbox. Busy field technicians benefit from easy-to-program-and-maintain hardware; multi-tasking systems engineers take full advantage of the local and remote diagnostics tools available with Accutech Manager.
Interested in bringing a legacy control system into the 21st century? Begin with a base radio and field unit and then add new field units as old equipment is phased out. There’s no need to worry about future expansion plans; your system is virtually future-proof with support for up to 100 field units per base radio and 16 base radios per Accutech network. There is always room to grow with Accutech.
Take advantage now with a varied selection of field units, and look forward to more exciting products coming down the road in the very near future!
Equipment Monitoring
The AM20 Acoustic Monitor measures ultrasound and ambient temperature levels to provide monitoring for pressure relief valves, steam traps, automatic tank cleaning (CIP) systems, on/off conditions of compressors and pumps, and any other application that generates ultrasound.
 |
AM20 Wireless Acoustic Monitor |
Pressure
Accutech wireless pressure sensors measure gauge, absolute or differential pressure in most corrosive or non-corrosive liquids and gases. Sensor diaphragm is 316 stainless steel (or Hastelloy C upon special request).
| Pressure ranges available: | 5 to 10000 psig |
| +/- 100 inches H2O to 300 psi differential | |
| 30 to 250 psia |
 |
GP10 Wireless Gauge Pressure DP20 Wireless Differential Pressure AP10 Wireless Absolute Pressure |
Level
These wireless tank level field units use a submersible pressure sensor to provide hydrostatic level of a vented tank or well. Specific-gravity correction and all common level units are offered.
 |
SL10 Wireless Submersible Level GL10 Wireless Gauge Level |
Flow
The DP20 is ideally suited for level applications, especially in pressurized tanks. The product also has a square root function for use with orifice plates, v-cones, and pitot tubes, providing volumetric flow measurement in general industrial processes.
Open channel flow may be measured from liquid levels using the DP20 in Open Channel Mode and configured with a K factor to report directly in units of flow. Channels with irregular dimensions can be accommodated using an additional 22-point custom curve.
|
DP20 Wireless Differential Pressure |
Highly accurate turbine meter totalizer measures liquid and gas volumetric flowrate and totalizes accumulated flow volume from standard turbine flow meters (customer supplied turbine meter). Frequency range 1Hz to 10kHz.
 |
TM10 Wireless Turbine Meter Totalizer |
Analog and Digital I/O
Ideal for adding wireless capabilities in remote or hazardous locations to existing or newly wired devices such as Residual Chlorine sensors, Dissolved Oxygen probes, Nephelometric Turbidity Units (NTU), ultrasonic and radar level meters: the Accutech AI10 and AV10 wireless multi-input field units provide two analog inputs in either current (4-20mA) or voltage (0-10V) configurations. Each unit also includes two discrete contact closures.
Analog outputs and switch closure outputs are also available in a DIN-rail mounted module at the Accutech base radio.
 |
AI10 Wireless Multi-Input SI10 Wireless Switch Input |
