How do you strike a fine balance between producing quality food products and keeping costs to a minimum? Let Accutech show you how with a wide selection of ready-to-run, versatile field units, tailor-made to fit the needs of your clean production plant. From remote process temperature, pressure and level sensors, to control I/O connections, Accutech provides tether-free instrumentation that can be installed throughout the plant with minimal changes to existing wiring, at a fraction of the cost of conventional, wired systems.
Equipment Monitoring
The AM20 Acoustic Monitor measures ultrasound and ambient temperature levels to provide monitoring for pressure relief valves, steam traps, automatic tank cleaning (CIP) systems, on/off conditions of compressors and pumps, and any other application that generates ultrasound.
 |
AM20 Wireless Acoustic Monitor |
Pressure
Accutech wireless pressure sensors measure gauge, absolute or differential pressure in most corrosive or non-corrosive liquids and gases. Sensor diaphragm is 316 stainless steel (or Hastelloy C upon special request).
| Pressure ranges available: | 5 to 10000 psig |
| +/- 100 inches H2O to 300 psi differential | |
| 30 to 250 psia |
 |
GP10 Wireless Gauge Pressure DP20 Wireless Differential Pressure AP10 Wireless Absolute Pressure |
Temperature
The TC10 wireless thermocouple provides temperature data using standard J, K, S and T-type thermocouples. Wireless RTD temperature field units offer standard and non-standard RTDs including 4-wire DIN 100 Ω platinum, SAMA 100 Ω platinum and DIN 1000 Ω platinum.
 |
TC10 Wireless Thermocouple RT10 Wireless RTD |
Level
These wireless tank level field units use a submersible pressure sensor to provide hydrostatic level of a vented tank or well. Specific-gravity correction and all common level units are offered.
 |
SL10 Wireless Submersible Level GL10 Wireless Gauge Level |
Analog and Digital I/O
Ideal for adding wireless capabilities in remote or hazardous locations to existing or newly wired devices such as proximity switches, level switches, valve position, ultrasonic and radar level meters, or any other analog or switch input: the Accutech AI10 and AV10 wireless multi-input field units provide two analog inputs in either current (4-20mA) or voltage (0-10V) configurations. Each unit also includes two discrete contact closures.
Analog outputs and switch closure outputs are also available in a DIN-rail mounted module at the Accutech base radio.
 |
AI10 Wireless Multi-Input SI10 Wireless Switch Input 4AO/8SW Analog & Switch Output Modules |
Flow
The DP20 is ideally suited for level applications, especially in pressurized tanks. The product also has a square root function for use with orifice plates, v-cones, and pitot tubes, providing volumetric flow measurement.
Open channel flow may be measured from liquid levels using the DP20 in Open Channel Mode and configured with a K factor to report directly in units of flow. Channels with irregular dimensions can be accommodated using an additional 22-point custom curve.
|
DP20 Wireless Differential Pressure |
Highly accurate turbine meter totalizer measures liquid and gas volumetric flowrate and totalizes accumulated flow volume from standard turbine flow meters (customer supplied turbine meter). Frequency range 1Hz to 10kHz.
 |
TM10 Wireless Turbine Meter Totalizer |
